Compression fittings Unidelta
Coupling
Coupling.
Designed to connect sections of PE and PVC pipes of the same diameter. Operating pressure 16 bar.
Reducing coupling
Reducing coupling.
Designed to connect sections of PE and PVC pipes of different external diameters. Operating pressure 16 bar.
Male adaptor
Compression male adaptor.
It is intended for transition from PE pipe to products with internal thread, to filters, transition to ball valves etc. Operating pressure 16 bar.
Female adaptor
Compression female adaptor.
It is used in the installation of cold drinking or technical water supply systems, automatic irrigation systems, mounting an electromagnetic valve and filter. The thread is reinforced with a stainless steel ring. Operating pressure 16 bar.
Universal transition coupling
Universal clamping coupling with transition to metal.
Designed for transition from metal to polyethylene pipe without threading. The coupling is equipped with a special nut (collet clamp) that tightens the connection and makes it more reliable.
Working pressure 10 bar.
90° Elbow
Elbow 90 °.
It is used to connect pipes at an angle of 90 ° when turning the water supply system, connecting to pumping stations, main and distributing pipes of irrigation systems. Operating pressure 16 bar.
90° Elbow with threaded male take off
90° Elbow with threaded male take off.
Designed to connect pipes at an angle of 90 °. Used for the transition from PE pipeline of various diameters to products with internal thread. Operating pressure 16 bar.
90° Elbow with threaded female take off
90° Elbow with threaded female take off.
Designed to connect pipes at an angle of 90 °. Used to connect PE pipes to fittings or metal pipes. The thread is reinforced with a stainless steel ring. Operating pressure 16 bar.
45° Elbow
Elbow for connecting PE pipes at an angle of 45 °.
It is used as a rotary element when laying water supply systems, irrigation systems, etc. based on polyethylene pipes. Operating pressure 16 bar.
90° Elbow with lateral threaded female take off
90° Elbow with lateral threaded female take off.
Designed to connect polyethylene pipes at an angle of 90 ° and a threaded fitting having an external thread perpendicular to the elbow. Operating pressure 16 bar.
90° Tee
90° Tee.
Designed for branching the main PE pipeline at an angle of 90º for pipes of equal diameter. Operating pressure 16 bar.
90° Reducing tee
90° Reducing tee.
Designed for branching the main PE pipeline at an angle of 90º to create a pipe outlet with a smaller diameter. Operating pressure 16 bar.
90° Tee with threaded male take off
90° Tee with threaded male take off.
Designed for the transition from the PE pipeline to products with a female thread, to filters, to ball valves, etc. Operating pressure 16 bar.
90° Tee with threaded female take off
90° Tee with threaded female take off
Designed to combine polyethylene pipes with threaded elements of automatic irrigation systems. The thread is reinforced with a stainless steel ring. Operating pressure 16 bar.
90° Tee with increased take off
90° Tee with increased take off
Designed for branching of the main PE pipeline at an angle of 90º to create a pipe branch with a large diameter. Working pressure 16 bar.
End plug
End plug.
Designed for temporary or permanent overlapping pipe ends. Operating pressure 16 bar.
Flanged adaptor
Flanged adaptor.
Designed to connect a polyethylene pipeline with steel pipe fittings. Operating pressure 16 bar.
Clamp saddle with reinforcing ring
Clamp saddle with reinforcing ring.
Designed for tapping into a polyethylene pipe. One half of the inset has a bend with an internal thread, reinforced with a stainless steel ring, to which a fitting with an external thread is connected. Operating pressure 10 bar.
Clamp saddle with reinforcing ring PN 16 bar
Clamp saddle with reinforcing ring PN 16 bar.
Designed for tapping into a polyethylene pipe. One half of the inset has an outlet with an internal thread, to which a fitting with an external thread is connected. Operating pressure 16 bar.
Underclamp tapping saddle
Underclamp tapping saddle.
Designed for tapping into a polyethylene pipe under pressure without a welding machine and additional equipment for cutting a hole in the pipe in cases where it is not possible to turn off a section of the pipeline. The design consists of two halves, one of which has a threaded outlet for the subsequent installation of the adapter piece for tapping. Working pressure 16 bar.
Polypropylene fittings wrench 16 - 63
Polypropylene fittings wrench 16 - 63.
Designed for installation of compression fittings with HDPE pipe.Allows you to quickly and efficiently tighten the pipe inside the fitting. Diameter of compression elements for key gripping from 16 to 63 mm.
Acetalic resin fittings wrench 63 - 110
Acetalic resin fittings wrench 63 - 110.
Designed for installation of compression fittings with HDPE pipe.
Allows you to quickly and efficiently tighten the pipe inside the fitting. Diameter of compression elements for key gripping from 63 to 110 mm.
Compression check valve
Compression check valve.
Designed to freely pass the flow of the working fluid in one direction and shut it off in the opposite direction.
Female/female threaded check valve
Female/female threaded check valve.
Designed to freely pass the flow of the working fluid in one direction and shut it off in the opposite direction.
Compression ball valve
Compression ball valve.
Designed to shut off the flow of water in drinking or industrial water supply systems. It connects polyethylene pipes with compression couplings.
Ball valve threaded female/female
Ball valve threaded female/female.
Designed to freely pass the flow of the working fluid in one direction and shut it off in the opposite direction. Has a female thread on both sides.
Compression ball valve female threaded
Compression ball valve female threaded.
Designed to freely pass the flow of the working fluid in one direction and shut it off in the opposite direction. It has a collet clamp on one side and a female thread on the other. This connection allows you to make a transition from polyethylene to steel or use couplings to increase or decrease the diameter after installing the valve.
Ball valve threaded male/male
Ball valve threaded male/male.
Designed to freely pass the flow of the working fluid in one direction and shut it off in the opposite direction. Has a male thread on both sides.
Compression ball valve male threaded
Compression ball valve male threaded.
Designed to freely pass the flow of the working fluid in one direction and shut it off in the opposite direction. The valve has a collet clamp on one side and a male thread on the other.
Ball valve threaded female/male
Ball valve threaded female/male.
Designed to freely pass the flow of the working fluid in one direction and shut it off in the opposite direction. It has a female thread on the one hand, and a male thread on the other.